|
Alu Upper Plate 7075 T6 (4mm)
#351345
Front upper plate designed to increase rigidity and strength. CNC-machined from highest-grade 4mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging.
|
|
|
Alu Front Brace 7075 T6 (5mm)
#352086
XRAY has designed a new rigid but lightweight front brace for the XB8, adhering to the legendary attention to detail while also adding strength and saving weight.
|
|
|
Composite Front Brace - V2
#352089
Front brace made from tough molded composite. Using the composite brace will make the car more flexible and forgiving, thus making the car easier to drive. Recommended for bumpy tracks.
|
|
|
Front Lower Suspension Arm - Soft - Long
#352111
Front lower suspension arm made from tough molded composite - soft rigidity. May be used on either left or right side. Engraved with "S" for easy identification.
|
|
|
Front TQ Lower Suspension Arm
#352112
The redesigned front lower suspension arms with all new special profile provide higher stiffness and rigidity to prevent bending of the arm under extreme racing conditions. The arms are moulded from a special composite mixture that provides sufficient flexibility to give easy-driving handling characteristics in all racing conditions.
|
|
|
Steel Eccentric Bushing 1 - V2 (2)
#352174
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 1 setting (identified by 1 dot) allows for either +1 or -1 caster adjustment depending on the orientation of the bushing.
|
|
|
Steel Eccentric Bushing 2 - V2 (2)
#352175
Eccentric bushing for I.A.C. (Integrated Adjustable Caster). 2 setting (identified by 2 dots) allows for either +2 or -2 caster adjustment depending on the orientation of the bushing.
|
|
|
Alu Steering Block - Right
#352255
Right steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.
|
|
|
Alu Steering Block Left
#352265
Left steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.
|
|
|
Euros'05 TQ Front Suspension - Set
#352301
After extensive development and tests XRAY brings you new suspension holders providing you with new suspension geometry specially designed for flat and bumpy tracks. These new suspension holders were with a great success used at the recent European Championship where XRAY dominated and set TQ.
|
|
|
Alu Front Upper Arm Holder - 7075 T6 (5mm)
#352331
Front upper suspension holder for REAR of front bulkhead. CNC-machined from highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging.
|
|
|
Alu TQ Front Upper Arm Holder - 7075 T6 (8mm)
#352332
Rear lower suspension holder for REAR of rear bulkhead of XB8-TQ. Allows for rear toe-in angles 2-4°. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging.
|
|
|
Alu âś3Dâť Steering Plate 7075 T6 (6mm)
#352571
CNC-machined steering plate from 6mm highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging. This optional âś3Dâť steering plate has various steering linkage mounting positions for optimal bump steer adjustment (adjustment of front toe change during suspension movement).
|
|
|
Ball Stud 5.8mm With Backstop - V2 (2)
#352651
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy jump. Manufactured from world-renown Hudy Spring Steel™.
|
|
|
Composite Rear Brace - V2
#353089
Rear brace made from tough molded composite. Using the composite brace will make the car more flexible and more forgiving, thus making the car easier to drive. Recommended for bumpy tracks.
|
|
|
Rear TQ Lower Suspension Arm Right
#353112
The redesigned rear lower suspension arm (right) with all new special profile provides higher stiffness and rigidity to prevent bending of the arm under extreme racing conditions. The arms are moulded from a special composite mixture that provides sufficient flexibility to give easy-driving handling characteristics in all racing conditions.
|
|
|
Rear TQ Lower Suspension Arm Left
#353122
The redesigned rear lower suspension arm (left) with all new special profile provides higher stiffness and rigidity to prevent bending of the arm under extreme racing conditions. The arms are moulded from a special composite mixture that provides sufficient flexibility to give easy-driving handling characteristics in all racing conditions.
|
|
|
Eccentric Bushing for Alu Rear Hub Carrier (Set)
#353180
Set of molded composite eccentric bushings for alu rear hub carriers #353355 and #353365. The eccentric bushings are used for rear suspension geometry adjustment. Exchanging the bushings allows 9 different geometry settings. Each bushing is marked for easy identification.
|
|
|
Euros'05 TQ Rear Suspension - Set
#353301
After extensive development and tests XRAY brings you new suspension holders providing you with new suspension geometry specially designed for flat and bumpy tracks. These new suspension holders were with a great success used at the recent European Championship where XRAY dominated and set TQ.
|
|
|
Adjustable Alu Rear Hub Carrier - Right
#353355
New innovation and new XRAY patent â“ the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions. The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted.
|
|
|
Adjustable Alu Rear Hub Carrier - Left
#353365
New innovation and new XRAY patent â“ the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions. The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted.
|
|
|
Mud Scraper - Graphite - Set
#353369
The XB8 Mud Scraper is CNC-machined from strong graphite material, and is easily installed on the composite rear hub carriers by the two included screws. The mud scraper is great when running in wet and dirty racing conditions, as it helps to remove mud from the inner part of the wheels, enabling the buggy to jump perfectly. A "must have" for serious racers or anybody bashing in dirt and mud.
|
|
|
Lexan Rear Wing - 1/8 Off-road
#353512
XRAY super lighweight 1/8 off-road lexan wing designed for a perfect fit to XB8 and working in conjuction with the XRAY off-road bodies.
|
|
|
Rear Wing - Black
#353515
Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Orange
#353516
Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Pink
#353518
Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Rear Wing - Yellow
#353519
Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
|
|
|
Composite Adj. Shim For Rear Wing Plate (2)
#353530
Tough molded composite shim set used for prolonging or shortening the rear wing for increased or decreased rear traction. Shims are positioned between the rear shock tower and the wing holders.
|
|
|
Alu Center Diff Mounting Plate Set (2)
#354015
Aluminum center diff mounting plate set designed to increase rigidity and strength. CNC-machined from highest-grade aluminum. Like most main alloy components on the XB8 and XB8-TQ, this plate set is finished in XRAY stylish black with trademark silver edging. Includes composite bushings which eliminates vibration and excessive wear of the diff outdrives.
|
|
|
Center Diff Lower Plates (2)
#354032
Precision-cut shimming plates for raising the center diff mount when using 48T center spur gear (#355048).
|
|
|
Alu Center Diff Mounting Plate 7075 T6 (3mm)
#354055
Aluminum center diff mounting plate designed to increase rigidity and strength. CNC-machined from highest-grade 3mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging.
|
|
|
Steel Brake Pad Laser Cut - Hardened (4)
#354121
High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness.
|
|
|
Glued Brake Pad Set - Ultra-Efficient (4)
#354131
Factory pre-assembled brake pad set for consistent and precise braking. High-precision, ultra-efficient steel brake pads are CNC-machined and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency.
|
|
|
Brake Pad SLS (4)
#354132
New ultra-efficient brake pads from special slip-free material. Set of 4.
|
|
|
Front Diff Large Bevel Gear 38T
#355038
The new 38T front diff crown gear for the XB8 is CNC-machined from hardened HUDY steel developed specially for gears, allowing for ultra-true, vibration-free running. All edges are chamfered for smooth engagement. The "38" symbol is laser-engraved for easy recognition, as well as the bearing size is ground for maximum precision. Using this gear in the front diff of your XB8 alters the gear ratio from 3.333 (with 40T original gear) to 3.167. This makes the car easier to drive, especially in bumpy condition, and improves on-power stability. The new 38T front diff crown gear improves traction and reduces sliding.
|
|
|
Center Diff Spur Gear 48T
#355048
48-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter.
|
|
|
Center Diff Spur Gear 47T
#355049
47-tooth large external spur gear for center differential, precision-machined on a special gear machine. Must be used with Center Diff Shimming Plates (#354032) and Alu. Center Diff Mounting Plate 7075 T6 (3mm) (#354055) because of larger diameter.
|
|
|
Center Diff Spur Gear 45T
#355051
45-tooth large external spur gear for center differential. Precision machined on a special gear machine.
|
|
|
Center Diff Spur Gear 44T
#355052
44-tooth large external spur gear for center differential. Precision machined on a special gear machine.
|
|
|
Front Diff Outdrive Adapter - Long (2)
#355061
Diff outdrive adapters for front/rear differential made of HUDY Spring Steel™. Special enlongated design secures the drive shafts so they do not fall out in heavy jumps when using the new longer arms.
|
|
|
Center Diff Outdrive Adapter - Lightweight - Hudy Steel (2)
#355071
XRAY offers lightweight CNC-machined center diff outdrive adapters. Made from HUDY toughened steel, the outdrives have been strategically machined to be lighter than standard #355070 center diff outdrive adapters. For serious racers who are conscious of weight savings.
|
|
|
Alu Diff Pin - Hard Coated (2)
#355081
Alu hardcoated pins for gear differential are CNC-machined from premium lightweight Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Set of 2.
|
|
|
XRAY XB8 Active Differential™ 40T
#355100
The unique XRAY Active Differential is a high-performance, adjustable front gear differential for XB8 buggies⦠vastly improving the buggyâ™s speed and handling characteristics. The special design of the internal components using different angled segments allows the diff gears to engage on-power to increase the forward traction and stability to the buggy, making it faster and easier to drive.
|
|
|
Active Diff Segment 120° (2)
#355127
XRAY Active DiffT segments are CNC-machined from very tough steel, and have very precisely-machined "V" ramp grooves with 120 angle for easy disengagement adjustment.
|
|
|
Active Diff Large Bevel Gear 38T
#355138
The 38T diff bevel gear for XRAY Active Diff™ is machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
|
|
|
CVD Universal Drive Shaft F/R - Set - Hudy Spring Steel™
#355209
CVD drive shaft set made from world-renown HUDY Spring Steel™ connects the front or rear differential to the wheels. (Not exchangeable with drive shafts between the center differential and the front/rear differentials.) The CVD drive shaft is rebuildable and all parts are available separately as spare parts.
|
|
|
Alu Wheel Axle Offset +1mm - Hard Coated
#355251
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive.
|
|
|
Alu Wheel Axle Offset +2mm - Hard Coated
#355252
Hardcoated aluminum wheel axles with +2mm offset. Using these wheel axles will increase the overall track width by 4mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted in both front and rear.
|
|
|
Wheel Nut With Cover - Hard Coated (2)
#355265
Hardcoated aluminum wheel nut with cover for XB8 wheels. Using these wheel nuts, you will never have problems anymore with dirt getting into the wheel axle assembly! Fits front and rear wheel axles.
|
|
|
Battery Cable With Switch
#356050
The battery cable with switch connects the receiver battery to the receiver by way of an on/off switch. It is delivered together with switch cover.
|
|
|
Alu Radio Plate 7075 T6 (3mm)
#356115
Aluminum radio plate designed to increase rigidity and strength. CNC-machined from highest-grade 3mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging.
|
|
|
XRAY Spring-Set Soft White (2+2)
#358094
XRAY suspension spring set for XB8. Soft spring tension. Powder-coated white colour for easy identification. Complete set of 2 front and 2 rear springs.
|
|
|
4-Shoe Clutch - Complete Set
#358400
Complete set of 4-shoe clutch system includes flywheel, lightweight medium aluminum clutch shoes, gold (soft) clutch springs, assembly screws, flywheel collar, and flywheel nut.
|
|
|
4-Shoe Clutch Springs - Grey - Medium (4)
#358481
Medium clutch springs for 4-shoe clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with the soft springs.
|
|
|
Clutch Set - High Torque - V2
#358500
High-Torque Clutch set for XB8 is an important performance upgrade. The clutch provides a smoother and more continuous transfer of power from engine at very high RPM.
|
|
|
Clutch Bell 15T
#358515
15-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine.
|
|
|
Clutch Bell 13T - Lightweight
#358517
13-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability.
|
|
|
Clutch Bell 14T - Lightweight
#358518
14-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine, strategically lightened without sacrificing strength or durability.
|
|
|
Alu Clutch Shoes - Light 1.71g - CNC Machined (3)
#358561
These new 1.71g clutch shoes are slightly lighter than the stock aluminum shoes, allowing the engine to spool up a bit more before the shoes grab the flywheel. The end result is a clutch that will engage later in the powerband giving more rip out of the corners.
|
|
|
Clutch Springs 1.1mm (3)
#358582
Steel clutch springs. Wire diameter 1.1mm (hard) for later clutch engagement. Set of 3.
|
|
|
High Torque Clutch Springs - Medium (3)
#358588
Medium clutch springs for High-Torque clutch. Medium spring allows for good overall engagement point, though with slightly different characteristics in comparison with earlier springs.
|
|
|
Fuel Tank 123cc with Floating Filter
#358604
New fuel tank features an integrated floating stone filter to ensure the fuel pickup is always in the correct orientation â“ even if your car isnâ™t.
|
|
|
Alu Adjustable Engine Mount - Novarossi, Sirio, R&B, Max, JP, GRP
#358712
Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine.
|
|
|
Alu Adjustable Engine Mount â“ Picco, Mega, Orion, LRP, OS
#358713
Adjustable engine mount CNC-machined from premium lightweight aircraft aluminum with XRAY sylish black finish and silver edging. The engine mount consists of two pieces: the adjustable bottom mount is affixed to the chassis while the upper mounts are attached to the engine.
|
|
|
Alu Stands For Engine Mount - Novarossi, Sirio, R&B, Max, JP, GRP
#358716
Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Novarossi, GRP, RB, Max, JP, and Sirio engines. To be used with the Adjustable Engine Mount.
|
|
|
Alu Stands For Engine Mount â“ Picco, Mega, Orion, LRP, OS
#358717
Set of 2 single-piece engine mounts CNC-machined from premium lightweight aircraft aluminum, with XRAY stylish black finish and silver edging. The single-piece mounts fit Picco, Mega, Orion, LRP and OS engines. To be used with the Adjustable Engine Mount.
|
|
|
Composite Air Filter Cover
#358832
Molded composite optional cover for air filter protects the filter and is recommended for muddy and rainy conditions. The cover is a direct fit for the 808 low-profile air filter assembly.
|
|
|
XRAY Premium Silicone Oil 100 cSt
#359210
XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 150 cSt
#359215
XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 200 cSt
#359220
XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 250 cSt
#359225
XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 300 cSt
#359230
XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 350 cSt
#359235
XRAY Premium Silicone Oil 350 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 400 cSt
#359240
XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 450 cSt
#359245
XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 500 cSt
#359250
XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 600 cSt
#359260
XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 700 cSt
#359270
XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 800 cSt
#359280
XRAY Premium Silicone Oil 800 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 900 cSt
#359290
XRAY Premium Silicone Oil 900 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 1000 cSt
#359301
XRAY Premium Silicone Oil 1000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 2000 cSt
#359302
XRAY Premium Silicone Oil 2000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 3000 cSt
#359303
XRAY Premium Silicone Oil 3000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 5000 cSt
#359305
XRAY Premium Silicone Oil 5000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 7000 cSt
#359307
XRAY Premium Silicone Oil 7000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 10 000 cSt
#359310
XRAY Premium Silicone Oil 10 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 20 000 cSt
#359320
XRAY Premium Silicone Oil 20 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 30 000 cSt
#359330
XRAY Premium Silicone Oil 30 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 60 000 cSt
#359360
XRAY Premium Silicone Oil 60 000 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Body for 1/8 Off Road Buggy - V2
#359701
Redesigned clear Lexan® body for 1/8 off-road buggy (version 2) includes window masks.
The front nose has reinforced edges where it fits around the front shock tower, to reduce body tears. The area around the engine has been specially designed to promote airflow into and around the engine head to assist with engine cooling. The sides of the body have been redesigned to allow the body to closely cover the sides of the car to minimize the amount of dirt entering the chassis (also helps in wet conditions).
|
|
|
Hex Screw SH M3x18 - Left Thread (10)
#902319
Unique custom-made left-thread screws specially developed and designed for use on off-road and truggy arms (for the lower shock mounts) to prevent the screws from turning out due to vibration. To be used only on LEFT REAR arm and RIGHT FRONT arm.
|
|
ID |
Product Name |
Released |
352174 |
|
Aug. 01, 2019 |
352175 |
|
Aug. 01, 2019 |
358400 |
|
May 31, 2019 |
358413 |
|
Feb. 19, 2019 |
358413-L |
|
Feb. 19, 2019 |
358430 |
|
Feb. 19, 2019 |
358450 |
|
Feb. 19, 2019 |
358458 |
|
Feb. 19, 2019 |
358459 |
|
Feb. 19, 2019 |
358460 |
|
Feb. 19, 2019 |
358461 |
|
Feb. 19, 2019 |
358480 |
|
Feb. 19, 2019 |
358481 |
|
Feb. 19, 2019 |
358482 |
|
Feb. 19, 2019 |
358499 |
|
Feb. 19, 2019 |
354113 |
|
Jan. 24, 2019 |
354010-G |
|
Dec. 11, 2018 |
355215 |
|
Dec. 06, 2018 |
941318 |
|
Jan. 11, 2018 |
971061 |
|
Nov. 23, 2017 |
| |
|
|